PU Timing Belt Jointing Machine from China Factory
| Machine | Splice press for PU Timing Belt |
|---|---|
| Model Available: | UT-TW100 / UT-TW150 |
| Max Belt width: | 100mm/150mm |
| Pressure : | Pneumatic |
| Voltage: | 220V/380V |
| Joint Belts : | PU Timing Belts |
| Mold: | T5,T10,T20,AT5,AT10,AT20,T,5M,8M,14M,S5M,S8M,H, L ,XL ect. |
| Splicing Time | about 18 minutes |
Welding & Splicing Machine for PU Timing Belts
PU Timing Belt Jointing Machine it is used to make endless PU timing belts, there will be welding molds with all types of profiles PU timing belts, such as T5,T10,T20,5M,8M,AT10,AT20 ect. the machine can joint double sided teeth timing belts too.
- Data Sheet
| Data | UT-TW100 | UT-TW150 |
| Max belt width | 100mm | 150mm |
| Pressure mode | Pneumatic | Pneumatic |
| Minimum perimeter: | 850mm | 900mm |
| Water pump Voltage | 24V | 24V |
| Machine Voltage | 220V SIN-PHASE , 380V 3-PHASE or Customized | |
| Machine dimension | 170kg | 178kg |
| Machine dimension | 970mm*870mm*1280mm | 970mm*870mm*1280mm |
Adjust Molds for PU Timing Belts Splicing
The molds are adjustable, you can adjust the molds to suit any width of the PU timing belts. One Molds for various width timing belts.if you have large width spcling requirements, you can consider this mold.
Common Mold for PU Timing Belt Splice
Common mold can not adjust, to splice different width of timing belts, you need to prepare different molds. If you don’t have too much width to splice, you can choose this mold.
